DJI Ronin 2 - Using the Remote Controller

Ronin 2 exists to let filmmakers capture the scene they see in their mind. This video will show you how to use the Ronin 2 remote controller. Unlock the pan axis buckle poll axis buckle and tilt the axis buckle. Power on the gimbal. Turn on the remote controller. If the status LED is solid red the remote controller needs to be bound to the gimbal. Enter the settings via the built in touch panel and select start. The gimbal is ready to bind. Press the C1 button, C2 button and record button at the same time. The remote controller starts binding. When the status LED is solid green the remote controller is bound to the gimbal. Otherwise bind the remote controller again. Push the control joystick left or right to control the pan axis movement. Push the control stick up or down to control the tilt axis movement. Turn the roll knob to control the roll axis movement. Turn the pan axis speed control knob tilt axis speed control knob to adjust the speed of the pan axis, tilt axis and roll axis. Press the record button to start or stop recording. Toggle the mode switch to switch between different follow modes: free, follow and recenter. Toggle the profile switch to switch between various profiles. Convenient and efficient in use.