DJI RONIN-S - How to Update the Firmware

RONIN-S, how to update the firmware. Before updating, setup and balance the Ronin-S. Make sure that the battery level is high enough. It is recommended that the Ronin-S be updated when it is powered off. Connect the Ronin-S o the PC with the standard Type-C cable. Launch DJI Assistant for Ronin and log into your DJI account. Click Ronin-S. Enter the firmware upgrade page and wait for the firmware list to refresh. Select the required firmware version, click upgrade. After the firmware is downloaded the gimbal will automatically update. After the update is complete restart the Ronin-S. Make sure that the PC is connected to the internet. Do not interrupt the data connection during the update. After the update if the indicator on the Ronin-S blinks red the update failed please try updating again. If you have nay questions contact DJI support.