Power on the Phantom 4 Pro V2.0 and remote controller. Make sure that the remote controller is linked to the drone. Turn on the DJI goggles. Use the touch panel to enter tool, settings, linking settings and tap confirm. Then press the link button on the aircraft. If linking complete is shown then the quick lining is complete. After connecting the DJI Goggles a mobile device running DJI Go 4 can also be connected.
DJI Phantom 4 Pro V2.0 - How to Connect the DJI Goggles
Recent Articles
-
Phantom 4 Series - Calibrating the IMU
Before calibration remove the propellers. Power on the...
-
DJI Phantom 4 Pro V2.0 - Activating the Aircraft
Power on the remote controller and aircraft and...
-
DJI Phantom 4 Pro V2.0 - How to Link the Aircraft to the Remote Controller
Linking with DJI Go 4. Connect the remote...
-
DJI Phantom 4 Pro V2.0 - How to Update the Firmware with a PC
Updating the Phantom 4 Pro V2.0 separately. Before...
-
DJI Phantom 4 Pro V2.0 - Updating the Firmware with DJI GO 4
Remove the gimbal clamp, connect the remote controller...
