DJI Phantom 4 Pro V2.0 - How to Update the Firmware with a PC

Updating the Phantom 4 Pro V2.0 separately.  Before updating fully charge the drone and remote controller. Connect the Phantom 4 Pro V2.0 to the PC with a USB cable. Power on the drone. Launch DJI Assistant 2. Log into your DJI account. Wait until the firmware list is shown on the screen. Click upgrade ad update the aircraft’s firmware following the on screen instructions. Do not turn off the aircraft or touch the USB cable during the update. Please wait until the update is complete. Updating your remote controller separately. Connect the remote controller to the PC with a USB cable. Power on the remote controller. The remote controller does not support hot swapping. Power on the remoter controller after it has been connected to the PC. Click on the connected device. Click update on the firmware upgrade screen. Do not turn off the remote controller or touch the USB cable during the update. Please wait until the update is complete. Updating the Phantom 4 Pro v2.0 and remote controller simultaneously. Connect the remote controller to the PC with a USB cable. Power on the remoter controller and aircraft. Ensure that the remote controller has been linked with the drone. Click on the connected device. The drone’s and remote controller’s firmware version will be displayed. Select the latest firmware version. Click upgrade. The Phantom 4 Pro version 2.0 and the remote controller’s firmware will be updated simultaneously. If the update fails several times or the drone cannot be linked to the remote controller as the aircraft’s and remote controller’s firmware versions do not match, it is recommended that you update them to the latest version separately.