Remove the aircraft's extended PORT cover, then insert the speakers USB plug into the port. When the speaker is securely plugged into the port, tighten the screws on both sides of the base. Please check carefully and ensure the speakers is safely secured to the aircraft. Before using the speaker, please adjust its tilting angle according to the actual need.
After the speaker's correctly mounted to the medic 2 enterprise, the aircraft will automatically recognize the speaker and show a speaker icon in DJI Pilot. Tap the speaker icon to enter the speakers broadcasting interface. The speaker has two modes, “instant broadcast and “play local audio”.
The instant broadcast supports up to 60 seconds of audio playback. Record audio by tapping the red Microphone button. Tap the red button again to upload the recorded audio. The speaker can play the recorded audio after its uploaded. When the audio is playing, you can adjust the speaker’s volume according to the actual situation. Users can save up to 10 prerecorded audio files in the play local audio.
New audio recordings can be added in the speaker's setting menu. Audio is added the same way as an instant broadcast mode. Click save and the name the audio., then tap confirmed. After the audio is upload the audio list will display the save audio files. You can delete, renamed or listen to the recorded audio file.
In the play local audio, users can play an audio files once or put it on repeat. You can tap “exit” to stop audio playing. After using the speaker, please power of the aircraft, then remove the speaker from the aircraft. Please remember to attach the port cover to protect the extended ports.
Hit the like button if this tutorial was helpful. If you need any support with your DJI gear, feel free to contact us via Facebook messenger by following the link in the description. Thank you for watching.
