DJI Mavic 2 Enterprise

Remove the aircraft’s extended port cover, then insert the spotlight USB plug into the port. When the spotlight is securely plugged into port, tighten the screws on both sides of the base. Please check carefully, the spotlight is safely secured to the aircraft. Before using the spotlight, please adjust the tilting angle according to actual need.

After the spotlight is correctly mounted to the Mavic 2 enterprise, the aircraft will automatically recognize spotlight and show a spotlight icon in DJI Pilot. Tap the spotlight icon to turn it on or off. Tap the general setting to go to the spotlight settings.

You can turn the spotlight on or off, and adjust its brightness here. After using the spotlight, please power off the aircraft then remove the spotlight from the aircraft. Please remember to re-attach the port cover to protect the extended ports.

Hit the like button if this tutorial was helpful. If you need any support with your DJI gear, feel free to contact us via Facebook messenger by following the link in the description. Thank you for watching.

Remove the aircraft's extended PORT cover, then insert the speakers USB plug into the port. When the speaker is securely plugged into the port, tighten the screws on both sides of the base. Please check carefully and ensure the speakers is safely secured to the aircraft. Before using the speaker, please adjust its tilting angle according to the actual need.

After the speaker's correctly mounted to the medic 2 enterprise, the aircraft will automatically recognize the speaker and show a speaker icon in DJI Pilot. Tap the speaker icon to enter the speakers broadcasting interface. The speaker has two modes, “instant broadcast and “play local audio”.

The instant broadcast supports up to 60 seconds of audio playback. Record audio by tapping the red Microphone button. Tap the red button again to upload the recorded audio. The speaker can play the recorded audio after its uploaded. When the audio is playing, you can adjust the speaker’s volume according to the actual situation. Users can save up to 10 prerecorded audio files in the play local audio.

New audio recordings can be added in the speaker's setting menu. Audio is added the same way as an instant broadcast mode. Click save and the name the audio., then tap confirmed. After the audio is upload the audio list will display the save audio files. You can delete, renamed or listen to the recorded audio file.

In the play local audio, users can play an audio files once or put it on repeat. You can tap “exit” to stop audio playing. After using the speaker, please power of the aircraft, then remove the speaker from the aircraft. Please remember to attach the port cover to protect the extended ports.

Hit the like button if this tutorial was helpful. If you need any support with your DJI gear, feel free to contact us via Facebook messenger by following the link in the description. Thank you for watching.

Remove the aircraft's extended port cover, then insert the beacons USB plug into the port. When the beacon is securely plugged into the port, tighten the screws on both sides of the base. Please check carefully and ensure the beacon is safely secured to the aircraft. After the beacon is correctly mounted to the Mavic 2 enterprise the aircraft will automatically recognize the beacon and show a beacon icon in DJI pilot.

Tap the beacon icon to turn the beacon on or off. The beacon blinks once per second, when it is turned on. After using the beacon, please power off the aircraft, then remove the beacon from the aircraft. Please remember to reattach the port cover to protect the extended ports.

Hit the like button, if this tutorial was helpful. If you need any support with your DJI gear, feel free to contact us via Facebook messenger by following the link in the description. Thank you for watching

To work better in low temperature environments, the Mavic 2 Enterprise intelligent battery can automatically self-heat to a suitable light temperature. If the batteries temperature is between -10°C to 6°C and the batteries power level is above 50 percent in the battery can self-heat.

The Mavic 2 Enterprise intelligent battery’s self-heating function can be enabled manually or automatically. Turn off the battery, press and hold the batteries button for 5 seconds, then the battery will enter self-heating mode. The battery status indicator will flash on and off slowly and sure the battery level at the same time.

When the battery is self-heating, press and hold the batteries button for 5 seconds to stop the self-heating. If the battery is attached to the aircraft and the aircraft was powered on, then as long as the battery meets the self-heating condition, it will automatically start self-heating. The battery status indicator will flash on and off slowly and show the battery level at the same time.

If the drone is powered off, the battery will stop-heating. If the batteries temperatures above 8°C, the battery will enter the retention state and the battery status indicator will blink clockwise. The battery can stay in the heat retention state for a maximum of 20 minutes. After 20 minutes or if the battery the conditions to stop self-heating, the battery will exit the retention state.

To insure that the battery can self-heat normal, please fully charge the battery before starting the battery self-heating function.

Hit the like button, if this tutorial was helpful. If you need any support with your DJI gear, feel free to contact us via Facebook messenger, by following the link in the description. Thank you for watching.