DJI Phantom 4 Pro/Advanced Linking the Aircraft and the Remote Controller

All Phantom 4 series remote controller are linked to the aircraft before delivery. But if the aircraft status
indicator blinks yellow quickly and the status LED on the remote controller is solid red the remote
controller needs to be linked with the aircraft. This video will show you how to link your Phantom 4 Pro
with its remote controller. These step also apply to the Phantom 4 Advanced. There are 2 ways to link
the Phantom 4 Pro. Here’s how to link your RC with DJI Go 4. Launch DJI Go 4. Select remote controller
settings, press linking remote controller and tap OK. The remote controller will emit a beeping sound
“DD” and the indicator will flash blue indicating that it’s ready to link. To the right of the aircraft nose
find the hole between the SD slot and the USB port. Press the button with a pen or suitable tool, hold
for 2 seconds and release it. Beeping will stop and the remote controller indicator will turn green. The
app will display a notification indicating linking is complete. Tap OK. Linking without a mobile device.
Power on the aircraft and remote controller. Then press the C1, C2 and record button at the same time.
When the remote controller starts beeping press the link button on the aircraft. Of linking fails please try
again. If linking fails repeatedly please contact DJI support.