Phantom 3 Tutorials- Upgrading the firmware on the Phantom 3 Standard

This video will introduce how to upgrade the firmware on the Phantom 3 Standard. Turn on the aircraft
and remote controller. Turn on Wi-Fi in your mobile device and check the wireless network list. Connect
to remote controller’s Wi-Fi. Enter the password 12341234. Run the DJI Go app. Check if the aircraft has
been successfully connected with the remote controller in the app initial interface. Tap update now on
the top of the screen. Disconnect the remote controller’s Wi-Fi and connect to the indoor/household
Wi-Fi. Tap to download the firmware in the app. Time used for downloading is subject to Wi-Fi speed.
Disconnect the indoor/household Wi-Fi after the firmware has been downloaded successfully. Download
it again if it fails. Connect to the remote controller’s Wi-Fi again. Tap to upgrade the firmware with the
aircraft connected to the RC. It will take 20 – 30 minutes to upgrade. A progress bar that shows the
upgrade status can be seen in the app. Do not turn off the aircraft during the upgrade. App will notify
whether upgrade is successful or not. If the upgrade fails please upgrade again. It is still can’t be
upgraded after trying several times connect the aircraft to PC and read the SD card. Find the hidden
folder in SD card click tool option, click folder option, click view option. Find the hidden folder and click
it. Click confirm to save the settings. Find the upgrade log file in the hidden folder. Contact DJI technical
support and send the log file to us for analysis.