This video will show you how to calibrate your remote controller. If your remote controller fails to
accurately control the aircraft or if the remote controller light turns red after linking to the aircraft and
the alarm is on continuously it may need to be calibrated. The steps to calibrate your remote controller
are as follows: power off the aircraft. Turn on the remote controller and launch the DJI Go app on your
mobile device. Tap camera. Tap the remote controller icon, choose RC calibration, tap calibrate. Move
the throttle stick according the instructions shown in the app. Repeat it several times and ensure that
the throttle stick can go through the maximum and minimum path. Turn the dial according to the
instructions given by the app. Repeat it several times. Tap finish. You have now finished calibrating your
remote controller. If the calibration fails repeat the listed steps above. If it fails several times please
contact DJI after sales service.
Phantom 3 Tutorials- Remote Controller Calibration
Recent Articles
-
DJI Phantom 3 SE ? Gimbal Auto Calibration
Gimbal Auto Calibration Phantom 3 SE. Place the...
-
Quick Tips - Phantom 3 Standard/SE - Linking the Remote Controller
Phantom 3 linking the remote controller with DJI...
-
DJI Quick Tips - Phantom 3 Standard/SE - Connecting to the Wi Fi Video Downlink
Phantom 3 connecting to the Wi-Fi video downlink....
-
DJI Quick Tips - Phantom 3 Standard - Resetting the Wi-Fi Video Downlink
Phantom 3 Standard resetting the Wi-Fi video downlink....
-
Quick Tips - Phantom 3 Standard/SE - Linking the Remote Controller without DJI GO
Phantom 3 linking the remote controller without DJI...
