Osmo flashing the firmware. If the update fails or the firmware is required to be updated perform the following steps to flash the firmware: to download the latest Osmo firmware visit http://www.dji.com/osmo/info#downloads. Download the latest Osmo firmware and copy it to the root directory of the SD card. Insert the SD card into the SD card slot in the camera when the Osmo is powered off. Press trigger, record button and power switch at the same time for 3 seconds and release them. It is updating when the camera status indicator blinks red and green alternatively. Wait for about 15 minutes. When the camera status indicator is solid green the update is complete.
DJI Quick Tips - Osmo - Flashing the Firmware
Recent Articles
-
Mounting the Zenmuse M1
Mount the Zenmuse M1. Rotate the gimbal. Lock...
-
Unlocking the Gimbal
DJI Osmo, unlocking the gimbal. Rotate the roll...
-
Locking an Osmo Gimbal
DJI Osmo, locking an Osmo gimbal. Rotate the...
-
OSMO Tutorials - How to install and use the OSMO Vehicle Mount
This video will show you how to install...
-
OSMO Tutorials - Osmo Battery and Charger Damage Assessment
This video will show you how to assess...
