This video will show you how to calibrate your Mavic remote controller. All Mavic remote controllers are calibrated before delivery. But if your remote controller is malfunctioning it may need to be calibrated. Before you calibrate please note the following: 1. Do not power on the aircraft during calibration. 2. Make sure the control sticks are centered. 3. Do not calibrate near metal objects. 4. Calibration takes approximately 60 seconds. If the app prompts that calibration has timed out after 60 seconds please try calibrating again. First connect the remote controller to your mobile device. Then turn on the remote controller and launch the DJI go app. Press the remote controller icon and choose RC calibration. Tap calibrate, make sure both control sticks are centered and tap the start button. Read the warning message and press ok. Rotate the control sticks in every possible direction according to the direction shown in the app. Ensure each stick has gone through its entire range of motion. Then rotate the dial and fill the progress bar in each direction as shown in the app. Tap finish. Remote controller calibration is now complete.
DJI Mavic Pro - Remote Controller Calibration
Recent Articles
-
Mavic Pro - Entering Wi-Fi Mode
Mavic Pro, entering Wi-Fi mode. Open the SD...
-
DJI Mavic Pro – How to Replace the RC Cable and Slider
Unfold the remote controller’s left mobile device clamp....
-
Linking the Remote Controller without DJI GO 4
Mavic Pro, linking the remote controller without the...
-
Attaching the Gimbal Clamp
Mavic Pro, attaching gimbal clamp. With the Mavic...
-
DJI Mavic Pro – Attaching Propeller Guards
Mavic Pro, attaching propeller guards. Check the letter...
