This video will show you how to activate your Mavic Pro. Connect your mobile device and remote controller. Power on the remote controller and the Mavic Pro. Launch DJI Go 4. An activation prompt will pop up when connecting with DJI Go 4 for the first time. Tap next and name your Mavic Pro. After you’ve named your aircraft tap continue and set a stick mode. The default stick mode is mode 2. You can set a customized mode under remote controller setting after activation. Tap continue. Next you can assign various commands to the C1 button and the C2 button on the back of the remote controller. Tap continue to view and LCD screen introduction. Tap continue and select your desired measurement system and video format. Tap continue to enter beginner mode settings. The aircraft is set to beginner mode by default. In the beginner mode the aircraft won’t takeoff with GPS signal and the flight altitude and distance will be limited to 98 feet or 30 meters. Tap continue to confirm your account’s email address. Please note that the account you used to activate your Mavic Pro cannot be changed later. The aircraft’s information will be bound to your account permanently. Your account will serve as proof of your warranty when you apply for service. Your Mavic Pro has now been activated
DJI Mavic Pro - Activating the Mavic Pro
Recent Articles
-
Mavic Pro - Entering Wi-Fi Mode
Mavic Pro, entering Wi-Fi mode. Open the SD...
-
DJI Mavic Pro – How to Replace the RC Cable and Slider
Unfold the remote controller’s left mobile device clamp....
-
Linking the Remote Controller without DJI GO 4
Mavic Pro, linking the remote controller without the...
-
Attaching the Gimbal Clamp
Mavic Pro, attaching gimbal clamp. With the Mavic...
-
DJI Mavic Pro – Attaching Propeller Guards
Mavic Pro, attaching propeller guards. Check the letter...
