Mavic Air, activating the aircraft. Connect the battery to the charger to awake and fully charge it. Connect the mobile device to the remote controller. Power on the remote controller and aircraft. Ensure that the mobile device is connected to the internet. Name your Mavic Air, set a control mode. The default stick mode is mode 2. Select your preferred measurement system. It is also recommend to enable beginner mode if this is your first time flying. Confirm your activation account and tap activate.
DJI Mavic Air | Activating the Aircraft
Recent Articles
-
DJI Mavic Air | Updating the Firmware with DJI Assistant 2
Upgrading the firmware with DJI Assistant 2. Power...
-
DJI Mavic Air | Linking the Remote Controller
Mavic Air, linking the remote controller. If the...
-
DJI Mavic Air | Activating the Aircraft
Mavic Air, activating the aircraft. Connect the battery...
-
DJI Mavic Air | Calibrating the Aircraft Vision Systems
Mavic Air, calibrating the aircraft’s vision systems. There...
-
DJI Mavic Air | Calibrating the IMU
Mavic Air, Calibrating the IMU. Before calibrating the...
