Matrice 200, mounting the Zenmuse XT with the adaptive ring. Align the wide slot on the adaptive ring with the red dot on the gimbal mount as shown. Rotate the adaptive ring to the right to lock it in place. Ensure that the adaptive ring has been mounted properly. Align the white line on the gimbal with the white line on the adaptive ring and mount the gimbal as shown. Rotate the adaptive ring to the left to lock it in place. Ensure that the gimbal has been mounted properly
DJI Quick Tips - Matrice 200 - Mounting the Zenmuse XT with the Adaptive Ring
Recent Articles
-
Matrice 200 Series V2 - How to Link the Remote Controller to the Aircraft
If a “No Connection” prompt appears on the...
-
DJI Quick Tips - Matrice 200 - Mounting the Zenmuse XT with the Adaptive Ring
Matrice 200, mounting the Zenmuse XT with the...
-
FlightHub - Introduction and Demonstration
DJI flight hub is a software platform that...
-
Matrice 200 Series - How to Set Master and Slave Remote Controllers
The Matrice 200 series drones support DJI’s standard...
-
DJI Zenmuse XT 2 - How to use MSX
Power on the remote controller and the aircraft....
