Inspire 2, mounting and using propeller guards. Prepare the 2 CW propeller guards and the 2 CCW propeller guards. Attach the CW propeller guards to the motor CW and attach the CCW propeller guard to the motor CCW. Ensure that the propellers are not mounted the aircraft. Ensure that the aircraft is not powered on. Release the buckle. Mount the propeller guard from the top of the frame arm and slide the propeller guard to the end as shown. Fasten the buckle and make sure it securely wraps around the landing gear support rod. Tighten the screw to lock the propeller guard tightly. Perform the preceding steps to mount other propeller guards to their matching arms. Note that the propeller guards may affect the flight performance and flight time. For safety reasons pay attention to the warning displayed in the app.
DJI Quick tips - Inspire 2 - Mounting and Using Propeller Guards
Recent Articles
-
How to Adjust the Inspire 2 Landing Gear´s Position Manually
How to Adjust the Landing Gear’s position manually?...
-
DJI Inspire 2 - Activating the Inspire 2
This video will show you how to activate...
-
DJI Inspire 2 - Linking the Aircraft and the Remote Controller
This video will show you how to link...
-
DJI Inspire 2 - Upgrading Remote Controller Firmware
This video will show you how to upload...
-
Mounting a 1550T Quick Release Propeller
Press down the spring pads on both aides...
