Inspire 1 Tutorials - How to set master and slave RC

This video will introduce how to set master and slave RC of Inspire 1. Devices used in this video includes: 1 Inspire 1 aircraft, 2 RCs and 2 mobile devices. Connect the mobile devices with the RCs respectively. Turn on the aircraft and the RCs. Run the DJI Go app on the master RC. Tap enter camera view. Tap RC settings, select the master option on the RC settings. Make sure the master RC is connected to the aircraft. The RC’s indicator should be green. If the indicator is red link the RC and the aircraft first. Keep in mind the master RC’s name as well as the password. Run the DJI Go app on the salve RC. Tap enter camera view. Tap RC settings. Tap the slave option in the RC settings. Tap to search the master RC. Tap the master RC needed in the list. Enter the password. Now the salve RC is connected to the master RC. Move the stick of the slave RC to see if the gimbal camera respond normally to the command. If the 2 RCs can’t be connected please repeat the above steps. Check if you have chosen the correct master RC and entered the correct password. Check if the mobile devices are connected to RCs successfully. Check if the 2 RCs and the aircraft are of the same firmware version. If you have failed to set the RCs many times please contact DJI technical support.