Spark, updating the remote controller firmware. Ensure that the remote controller’s power is higher than 30%. Power on the remote controller. Turn on the Wi-Fi on your mobile device and connect it to the remote controller. The default password is 12341234. Launch DJI G0 4. A new firmware update is available notification will be shown on the home screen pf DJI Go 4. Tap update now. Disconnect your mobile device from the remote controller’s Wi-Fi and connect it to a network with an internet connection. Return to DJI Go 4 and tap download now. If the download fails check whether the internet connection is normal and download the firmware again. Return to the DJI Go 4 and the remote controller will start updating automatically. It will take about 3 minutes to update. Do not power off the remote controller or exit the DJI Go 4 app screen. After the update is complete tap OK on the update complete prompt. Restart the remote controller before use. If the update fails update the firmware again. If the remote controller cannot be tuned off normally press and hold the flight pause button then press the power button and press again and hold the power button to turn off the remote controller.
DJI Quick Tips - Spark - Updating the Remote Controller Firmware
Recent Articles
-
Resetting the Wi-Fi SSID and Password
DJI Osmo, restoring default Wi-Fi settings. Power on...
-
DJI Beginner Tutorial Videos - Spark - Mounting the Intelligent Flight Battery
This video will show you how to mount...
-
DJI Beginner Tutorial Videos - Spark - Key Components and Parameters
This video will introduce the main modules of...
-
DJI Spark - Controlling the Aircraft with the Remote Controller
This video will show you how to control...
-
DJI Quick Tips - Spark - Activating the Spark by Scanning the QR Code
Spark, activating the aircraft by scanning the QR...
