This video will show you how to update your Mavic Pro Platinum’s firmware. Remove the propeller before the update and ensure that your mobile device is connected to the internet. Note that the aircraft remote controller cannot be updated if the remote controller’s power or aircraft’s power is less than 50%. It is recommended to fully charge the battery before the firmware update. Power on the aircraft and remote controller. Launch DJI Go 4. If a new firmware update is available a notification will be shown on the home screen of the DJI Go 4 if the firmware needs to be updated. Tap update now. Tap download now. When the download is completely it’ll start update. After the update is complete an update complete prompt will popup. If the firmware of some models such as batteries does not match aircraft firmware an inconsistent firmware found warning will be shown on the app. Slide slide to update to update the firmware. It’ll start updating. After the update is successful tap ok to restart the aircraft.
Mavic Pro Platinum – Updating the Firmware with DJI GO 4
Recent Articles
-
Mavic Pro - Entering Wi-Fi Mode
Mavic Pro, entering Wi-Fi mode. Open the SD...
-
DJI Mavic Pro – How to Replace the RC Cable and Slider
Unfold the remote controller’s left mobile device clamp....
-
Linking the Remote Controller without DJI GO 4
Mavic Pro, linking the remote controller without the...
-
Attaching the Gimbal Clamp
Mavic Pro, attaching gimbal clamp. With the Mavic...
-
DJI Mavic Pro – Attaching Propeller Guards
Mavic Pro, attaching propeller guards. Check the letter...
