Mavic Pro key components. Located on the aircraft’s nose the forward vision system inducing 2 vision sensors allows the aircraft to avoid obstacles in front of it and enhances flight safety. The 3 axis gimbal mounted to the bottom of the aircraft’s nose provides a steady controllable platform for the attached camera, keeping the camera stable during attitude changes when flying allowing you to capture stable images and videos and change the camera’s shooting angle. Located on the rear of the gimbal the cooling system can quickly cool the internal circuit helping all components to work stably and reliably. The bottom of the aircraft has the ultrasonic sensors and the downward vision system which helps the aircraft maintain its current height and position accurately at a certain altitude and under proper lighting conditions. Using the downward vision system the aircraft can hover precisely even without GPS signal. The Micro USB port on the left of the aircraft can be used for connecting the aircraft to your computer to read data and update the firmware.
Open the cover on the right of the aircraft and the camera Micro SD card slot, linking status indicator, link button and control mode switch can be seen. The intelligent flight battery is mounted on the back of the aircraft and it is the power source of the aircraft. There is a buckle on the left and ride sides of the battery to mount it to aircraft securely. The aircraft status indicator at the rear of the aircraft can be used to determine the aircraft status according to its blinking color and frequency. For more details about the aircraft status indicator refer to the user manual. The front LEDs located below the 2 front motors show the orientation of the aircraft
