The DJI Mavic Pro is a small yet powerful drone that turns the sky into your creative canvas easily and without worry helping you make every moment an aerial moment. This video will show you how to connect a mobile device to your Mavic’s remote controller. After the remote controller is fully charged unfold the mobile device clamps. Align the side connection cable with the port on your mobile device. The insert the mobile device into the left device clamp. Insert the mobile device into the right clamp to secure it. There are 2 positions for the side connection cable. Choose whichever position is most suitable for your mobile device. Also check to make sure the home button of your device is positioned as shown. You can connect your mobile device to either side or the bottom USB port. The Micro USB port on the left or the remote controller can be used for charging or connecting a mobile device. The USB port on the bottom of the remote controller is just used for connecting a mobile device. Mobile phones with connection ports on the bottom or side ca be connected to the RC. If you’re using the UBS port on the bottom the USB cable connected side port should be removed. After flight hold the left clamp and disconnect the mobile device. Then fold the device clamps.
DJI Mavic Pro - How to Install the Mobile Device
Recent Articles
-
Mavic Pro - Entering Wi-Fi Mode
Mavic Pro, entering Wi-Fi mode. Open the SD...
-
DJI Mavic Pro – How to Replace the RC Cable and Slider
Unfold the remote controller’s left mobile device clamp....
-
Linking the Remote Controller without DJI GO 4
Mavic Pro, linking the remote controller without the...
-
Attaching the Gimbal Clamp
Mavic Pro, attaching gimbal clamp. With the Mavic...
-
DJI Mavic Pro – Attaching Propeller Guards
Mavic Pro, attaching propeller guards. Check the letter...
