DJI Inspire 2 - Mounting the Zenmuse X7 Camera Lens and Balancing the

This video will show you how to mount the Zenmuse X7 camera lens and balance the gimbal. Remove the camera’s body cap and rear cap. Keep the lens mount facing downwards to prevent dust from entering before aligning the 2 lens mounting indexes on the camera and lens. Once the lens is aligned insert it into the camera. Rotate the lens clockwise until you hear a click. Do not press the lens release button while rotating the lens. Rotate the lens counter clockwise to make sure it is firmly attached. Mount the Zenmuse X7 to an aircraft and rotate the gimbal lock to the locked position to align the red dots. Before use make sure that the gimbal is balanced. It is recommend to use a lens hood and filter or 2 filter when balancing the gimbal. Note: 1. Use a UV or ND filter with a diameter or 46mm, a weight between 10 – 12g and a thickness of 4.4mm. 2. The lens hood must be compatible with the lens to avoid affecting the shooting

DJI Inspire 2 - Mounting the Zenmuse X7 Camera Lens and Balancing the Gimbal

Share on:

How to Adjust the Inspire 2 Landing GearÂ´s Position Manually

DJI Inspire 2 - Activating the Inspire 2

DJI Inspire 2 - Linking the Aircraft and the Remote Controller

DJI Inspire 2 - Upgrading Remote Controller Firmware

Mounting a 1550T Quick Release Propeller